When used in Mode Switch "M" (manual) position
When used in Mode Switch "M" (manual) position
This product is not equipped with pre-flash cancellation mode.
Therefore, when this product is used with a camera which pre-flashes, the light level control's
position "Full" cannot be used. In this case switch to the "1/2" position. It may be that,
even in the "1/2" position, the flash may not operate depending on the camera model used.
Please refer to SEA & SEA web site to obtain information regarding compatible cameras.
http://www.seaandsea.jp/
* With reference to camera's function, please refer to the camera's instruction manual.
Fiber Optic Cable
Fiber Optic Cable
To prevent a misfire please ensure that the Fiber Optic Cable is used.
When used with the DX-1G
When used with the DX-1G
When you use this product with the DX-1G, please attach the strobe to the housing using
the Fiber Optic Cable Adaptor which comes with the DX-1G housing.
* The Fiber Optic Cable Adaptor may not have been supplied with early DX-1G housings.
In this case, please contact the official SEA & SEA distributor in your country and ask for
the Fiber Optic Cable Adaptor.
The serial number of your DX-1G will be required to be supplied with the Fiber Optic Cable
Adaptor.
Safety Precautions for Use
Safety Precautions for Use
0649-Z-05
