E-10
Identification of Parts
OFF
Turns the power off. Set
the mode switch to [OFF]
when you are not using
the strobe.
M
Set the mode switch to this
position when you shoot
with manual flash.
TTL
Set the mode switch to this
position when you shoot with TTL flash.
Ready lamp Illuminates in red when the strobe is ready
to fire.
ＴＴＬ
lamp
Illuminates in green for
approx. 3 seconds after
firing with TTL flash output.
Operation
Mode Switch
Light amount can be adjusted in 2
increments (FULL or 1/2) when the mode
switch is set to [M].
Light Level Switch
Ready lamp
ＴＴＬ
lamp
