E-13
Connecting the Strobe
When you use this strobe with a compact digital camera,
connect the strobe to the camera (housing) with a fiber-optic
cable (optional). Using a built-in slave sensor, this strobe is
triggered by sensing the light from a digital camera's built-in
flash. If the fiber-optic cable is not used, depending on the
shooting conditions the strobe may either not fire, or not obtain
TTL flash exposure compensation.
CAUTION
Some housings are not compatible with fiber-optic cable.
1
Insert the fiber-optic cable's
connector into the slave sensor
socket of the strobe until it stops
2
Connect the other end of the
fiber-optic cable's connector to
the socket in the housing
●
When the housing is not equipped
with the socket, attach the strobe
mask (A: optional) to the flash
window of the housing, and then
connect the fiber-optic cable (B:
optional).
A
B
