Fig.7
Fig.8
Screw and dice for
locking the rod/beam
English
6) Beam installation
Rectangular beam installation (from 2 to 5 meters)
-
Insert the beam in vertical position and fix it with the special screw and the washer.
-
Insert the beam on the bracket with the rubber turned to the closing side and fix it with the special screws, washers and nuts
(Fig.8)
Mounting of the round beam (from 2 to 5 meters)
-
Insert the bracket of beam anchorage in vertical position and fix it with the special screw and washer.
-
Insert the beam on the bracket and fix it with the special screws, the washers and the nuts (Fig.7).
Attention: Before inserting the bracket of anchorage, insert the screws of anchorage into the same.
Tightening screw
and washer
Beam anchoring
bracket
Round
beam
Grooved
shaft
beam anchoring
bracket
Tightening
screw
and washer
Grooved
shaft
Rectangular
beam
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Cod. 67410035 Rev 06 - 06/2010
19
