SEA USER 2 24V DG R1B ALL-IN, Manual, Page: 35 / 40

n lis GENERAL N I E R E INS ALLER AND E USER
1. Read carefull these Instr ctions before beginning to install the product. Store these
instructions for future reference
2. Don t waste product pac aging materials and /or circuits.
3. This product was designed and built strictl for the use indicated in this documentation.
An other use, not expressl indicated here, could compromise the good
condition/operation of the product and/or be a source of danger. SEA S.p.A. declines all
liabilit caused b improper use or different use in respect to the intended one.
4. The mechanical parts must be compl with Directives: Machine Regulation 2006/42/CE
and following ad ustments), Low Tension (2006/95/CE), electromgnetic Consistenc
(2004/108/CE) Installation must be done respecting Directives: EN12453 and En12445.
5. Do not install the equipment in an explosive atmosphere.
6. SEA S.p.A. is not responsible for failure to observe ood Techniques in the construction
of the loc ing elements to motorize, or for an deformation that ma occur during use.
. Before attempting an ob on the s stem, cut out electrical power and disconnect the
batteries. Be sure that the earthing s stem is perfectl constructed, and connect it metal
parts of the loc .
8. Use of the indicator-light is recommended for ever s stem, as well as a warning sign
well-fixed to the frame structure.
9. SEA S.p.A. declines all liabilit as concerns the automated s stem s securit and
efficienc , if components used, are not produced b SEA S.p.A..
10. For maintenance, strictl use original parts b SEA.
11. Do not modif in an wa the components of the automated s stem.
12. The installer shall suppl all information concerning s stem s manual functioning in case
of emergenc , and shall hand over to the user the warnings handboo supplied with the
product.
13. Do not allow children or adults to sta near the product while it is operating. The
application cannot be used b children, b people with reduced ph sical, mental or sensorial
capacit , or b people without experience or necessar training. eep remote controls or
other pulse generators awa from children, to prevent involuntar activation of the s stem.
14. Transit through the leaves is allowed onl when the gate is full open.
15. The User must not attempt to repair or to ta e direct action on the s stem and must solel
contact qualified SEA personnel or SEA service centers. User can appl onl the manual
function of emergenc .
16. The power cables maximum length between the central engine and motors should not
2
be greater than 10 m. Use cables with 2,5 mm section. Use double insulation cable (cable
sheath) to the immediate vicinit of the terminals, in particular for the 230 cable. eep an
adequate distance (at least 2.5 mm in air), between the conductors in low voltage (230 )
and the conductors in low voltage safet (SEL ) or use an appropriate sheath that provides
extra insulation having a thic ness of 1 mm.