SEA USER 2 24V DG R1B ALL-IN, Manual, Page: 27 / 40

SET DESCRIPTION
DEFAULT NOTE
Always AUX output always Power supplied
In cycle AUX output active only during cycle
Opening
AUX output power supplied only in opening
Closing
AUX output power supplied only in closing
In pause
AUX out put power supplied only in pause
Phototest Security test
In cycle and phototest
During cycle only and with Fototest function enabled
Positive brake
management
Positive Electric-brake (24V in ON with stationary gate )
Negative brake
management Negative Electric-brake (24V in On with gate in cycle and
1 sec. before the Start)
Negative brake and
Photocell management Negative electric-brake not active on intervention of the
photocell
Open gate warning Light
1 flash per second in opening
2 flashes per second in closing
Steady lit in Stop or Open
Start 3 s
If active, the 24VAUX output is activated for 3 seconds at
every Start input, every photocells or security edge
intervention
Photo 1
Self-test active only on photocell 1
Photo 2
Self-test active only on photocell 2
Photo 1 and Photo 2
Self-test active on photocells 1 and 2
Closing
If the photocell is occupied during closing, it reverses the
movement; If the photocell is occupied during the pause,
it prevents the reclosing
Opening and closing
If occupied, the photocell blocks the movement as long as
it is busy
; when released, the opening movement
continues
Stop
If the photocell is occupied before the Start input, the
Start will be ignored. If the photocell is occupied after the
Start input, the photocell will be ignored. If the photocell
is occupied during closing, the gate will reopen
Stop and close
If the photocell is occupied during closing, it stops the
movement; when released, the closing movement
continues
Close
The photocell stops the gate until it is occupied in both
opening and closing; when released, the photocell gives a
closing command (the gate closes one second after the
photocell release)
Pause reload
If the photocell is occupied during pause, it recharges the
pause time set. If the photocell is occupied during closing,
it reverses the movement
Shadow loop
Until occupied, with open gate, the shadow loop prevents
the reclosing. Shadow loop is switched off during closing
Delete pause time
If the photocell is occupied during opening, pause or
closing, the gate reopens completely and closes without
observing the pause time set
Shadow loop RP
(pause reloading)
Until occupied, with open gate, the shadow loop prevents
the reclosing; when released, the gate repeats the pause
time set, then it closes. Shadow loop is switched off
during closing
97
Closing
SP MENU
Photo 1
and
Photo 2
94
Always
24V AUX
(Max. 500 mA)
PHOTOTEST 95
PHOTOCELL 1
SHADOW LOOP 1
58