GATE WARNINGS
The first thing to check is that the gate is in good running order
as follows:
A.
The gate is rigid and straight and runs smoothly throughout
its travel.
B.
The length of each gate leaf must not exceed 11,48 feet for
SURF 350/350 24V, always respecting the graph;
C.
the weight of each gate leaf must not exceed 661 pound for
SURF 350/350 24V always respecting the graph;
D.
The hinges are hardly anchored and are able to support the
torque of the operator; they do not have irregular movements
and/or any friction during the whole movement of the leaf.
PRECAUTIONS
SURF has been created for the automation of gates used by
vehicles only. Be aware to avoid the crossing of the gate path
because it is very dangerous for pedestrians (fig. 4).
Install the warning signs, on each side of the gate and in
avisible zone
Important:
For a higher security, SEA advices to install infrared
photocells.
which informs the pedestrians about the
danger they run when passing or resting in the environment of
the gate (fig. 5).
GATE WARNINGS AND PRECAUTIONS
- Install the operator in the correct position
- Do not Install the front bracket in a weak part of the gate
- Not for pedestrian opening
International registered trademark n. 2.777.971
5
Fig. 2
Fig. 3
Fig. 4
SURF
67410720
Fig. 5
Rev. 04 - 06/2014
