Sea Tel Coastal 14, Installation And Maintenance Manual

Page: 8 / 47

Installation Coastal 14 Ku-Band TVRO
1-4
2. Remove the radome top by removing the
three screws that thread into the radome
base.
3. Set the radome top aside in a safe location
until you are ready to close the radome.
4. Cut the shipping tie-wraps to allow free
movement of the antenna mechanism.
5. Thread a ¼-20 bolt through a bonded washer
(neoprene side down) and through one of the
threaded inserts in the base of the radome.
Install the other three bolts & bonded
washers in the same way.
6. Tighten all four of the mounting bolts