Sea Tel Coastal 14, Installation And Maintenance Manual

Page: 16 / 47

Setup Coastal 14 Ku-Band TVRO
2-6
3. Press the NEXT key to move the cursor to the digit to the left. Press
▼
&
▲
arrow keys to increment/decrement this digit.
4. Continue editing until all 4 digits have been set to the desired NID for this
satellite selection. Press the
SAVE
key to save the NID parameter for this
SAT.
5. If you want to edit any of the other default values that are loaded with
preset, press the
▼
arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the sub-menu and return to the SAT main menu display. From
there you can press the
▼
arrow key to go to next SAT numeric menu
choice or to the Factory Settings menu choice.
2.3.3.9. POL TRIM
This parameter is not used in this system. Set to 0000.
2.3.4. SAT2 - Second Satellite Parameters
Access all of the SAT2 individual parameters via a sub menu. If a second SAVED satellite if not
needed, preset SAT2 to empty/blank so NEXT will skip over this selection when you are
switching satellites.
All of the SAT2 parameters are set exactly the same way that the SAT1 parameters were set,
but would be set to different choices. Refer to the parameter setting information in the SAT1 –
First Satellite Parameters paragraphs to set PRESET, NAME, LON, LHCP freq, RHCP freq,
BAUD, FEC, NID and POL TRIM for a second satellite you wish to use periodically.
2.3.5. SAT3 - Third Satellite Parameters
Access all of the SAT3 individual parameters via a sub menu. If a second SAVED satellite if not
needed, preset SAT3 to empty/blank so NEXT will skip over this selection when you are
switching satellites.
All of the SAT3 parameters are set exactly the same way that the SAT1 parameters were set,
but would be set to different choices. Refer to the parameter setting information in the SAT1 –
First Satellite Parameters paragraphs to set PRESET, NAME, LON, LHCP freq, RHCP freq,
BAUD, FEC, NID and POL TRIM for a third satellite you wish to use periodically.
2.3.6. SAT4 - Fourth Satellite Parameters
Access all of the SAT4 individual parameters via a sub menu. If a second SAVED satellite if not
needed, preset SAT4 to empty/blank so NEXT will skip over this selection when you are
switching satellites.
All of the SAT4 parameters are set exactly the same way that the SAT1 parameters were set,
but would be set to different choices. Refer to the parameter setting information in the SAT1 –
First Satellite Parameters paragraphs to set PRESET, NAME, LON, LHCP freq, RHCP freq,
BAUD, FEC, NID and POL TRIM for a fourth satellite you wish to use periodically.
2.3.7. SAT5 - Fifth Satellite Parameters
Access all of the SAT5 individual parameters via a sub menu. If a second SAVED satellite if not
needed, preset SAT5 to empty/blank so NEXT will skip over this selection when you are
switching satellites.
All of the SAT5 parameters are set exactly the same way that the SAT1 parameters were set,
but would be set to different choices. Refer to the parameter setting information in the SAT1 –