Sea Tel 5012-33, Installation Manual

Page: 32 / 104

5012-33 Installation Manual Installation
3-12
3.7.3.1. Ships Mains
Connect the desired power cord from the rear panel of the MXP to power sourse (UPS power
recommended).
3.7.3.2. J1 (Modem RX)
Connect this RXIF Output to the satellite modem RX Input.
3.7.3.3. J2 Antenna RX
Connect this RXIF Input from the antenna to the MXP.
3.7.3.4. Ethernet 4 Port 10/100 switch
Ethernet connections to computer, satellite modem LAN devices as desired.
3.7.3.5. Fiber Interface
SFP Gigabit Ethernet connection.
3.7.3.6. Mini-USB Computer M&C Connection
Mini-USB M&C connection, if desired.
3.7.3.7. USB
Not connected - -Future development.
3.7.3.8. J9 A/B Serial
Computer RJ-45 Serial M&C connection.
3.7.3.9. J10C Modem
RJ-45 Serial M&C connection to Satellite Modem Console Port.
3.7.3.10. J10D OBM
RJ-45 Serial M&C connection to Out of Band Management equipment, if used.
3.7.3.11. J11 Gyro
Gyro SBS or Synchro connections.
3.7.3.12. J13 NMEA 0183
NMEA 0183 I/O connections..
3.7.3.13. J12 Aux 232
Auxiliary wired RS-232 connection.
3.7.3.14. J14 Aux 232
Not connected - -Future development.
3.7.3.15. J15 NMEA 2000
NMEA 2000 I/O connection..
3.7.4.
Connect your other Below Decks Equipment (ie, telephone, fax machine and computer equipment) to
complete your configuration.
Other BDE connections
3.8. Final Checks
3.8.1.
Do a visual inspection of your work to assure that everything is connected properly and all cables/wires are
secured.
Visual/Electrical inspection
3.8.2.
Double check all your connections to assure that it is safe to energize the equipment.
Electrical - Double check wiring connections