Sea Ray 320 Sundancer, Owner'S Manual

Page: 61 / 198

3.11
S
ECTION
3 • U
SING
Y
OUR
B
OAT
320 Sundancer
®
(355 Sundancer
®
)
B. T
O OPERATE FROM THE BOW
:
• Make sure that the safety lanyard is removed
from the anchor chain.
• Lift protective cap on foot switches and depress
UP or DOWN switch for the desired result.
C. T
O OPERATE MANUALLY
:
• Make sure that the safety lanyard (see Fig.
3.10.3) is removed from the anchor chain.
• Insert the emergency handle into the clutch nut
(see fig 3.10.4)
• Turn handle clockwise to retrieve anchor.
D. M
AINTENANCE
:
• Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of
grease.
Make sure that the power is off before any work is
performed on the windlass.
! DANGER
It is recommended at least once a year to
disassemble the windlass (see Fig. 3.10.4) and
remove any residue build-up.
• Using the emergency handle, unscrew the
clutch nut by turning the handle
counterclockwise.
• Remove the drum, upper cone, chain wheel and
lower cone.
• Wash down with fresh water and remove any
residue.
• Coat contact surfaces with a light film of
lubricant.
• Reassemble the unit and tighten clutch by
turning the handle clockwise.
REFER TO WINDLASS OPERATOR’S MANUAL
IN YOUR OWNER’S PACKET FOR DETAILED
OPERATING INSTRUCTIONS.