Sea Ray 320 Sundancer, Owner'S Manual

Page: 25 / 198

1.13
S
ECTION
1 • S
AFETY
320 Sundancer
®
(355 Sundancer
®
)
18. I
NTERNATIONAL
R
EQUIREMENTS
This vessel and its systems have been constructed
in accordance with standards and specifications in
effect at the time of manufacture as published by
the various regulatory authorities listed below.
1. Ministere De La Mer - France
2. Registro Italiano Navale - Italy
3. Det Norske Veritas - Norway
4. Securite des Nauires - Canada
5. J.C.I. (Japan Craft Inspection) - Japan
6. N.K.K. (Nippon Kaiji Kyokai) - Japan
7. B.S.I. (British Standards Institute) - England
8. Ministerio Obras Publicas Y Transportes - Spain
9. EC Recreational Craft Directive - European
Community.
Further information concerning these requirements
may be obtained from Sea Ray
®
Customer Service:
1-800-SRBOATS.
17. S
AFETY
H
OTLINES
The safety information in the preceeding pages
gives only the general areas of concern for
boating safety. It is not intended to be, nor can
it be, exhaustive. You must take a boating safety
course, and get hands-on instruction in the
proper and safe operation of your boat from
experienced persons before cruising.
The U.S Coast Guard offers many pamphlets on
safety and other information not covered in this
book. Contact your local Coast Guard unit or call
the toll-free safety hotlines below for information.
• U.S. Coast Guard 1-800-368-5647
• Canadian Coast Guard 1-800-267-6687
In other countries, ask your marine dealer for
information on how to contact the national boating
law enforcement agency.
G. P
ROPULSION
, C
ONTROL OR
S
TEERING
F
AILURE
If the drive train fails, or controls or steering do not
respond properly at all:
• Shut off engine.
• Put out the anchor to prevent drifting.
• Determine whether or not you can repair the
problem yourself. See the proper manuals for
assistance in troubleshooting the engine,
steering and engine controls.
• If you are not sure you can fix the problem, or if
conditions are adverse, signal for help.