Page
26
of
38
1.8.0 ANTI-TAMPER BLANKING CAP
(Your cap may differ in appearance to the one shown)
The dive conversion pressure cap doubles as an anti-tamper cap and can be used to seal off the
manual activation button in order to make the unit manual activation only. This can be useful to
reduce the risk of acccidental ‘manual’ activation in areas where the AU9 plb is being issued to an
inexperienced crew who are ‘likely’ to press the manual activation button or there is a risk of the
button being pressed by leaning on a sharp object.
Fig.32
1.9.0 MAINTENANCE
Check your unit regularly for signs of wear and tear, state of waterproof seals, battery status etc.
Do not use if any of these shows signs of wear and tear. If you damage your unit return it to the
manufacturer or your local supplier. Check the battery status before and after use, keep your unit
clean and stored safely and dry at all times. Wash with pure water and use a mild hand cleaner if
required, dry thoroughly after use. This unit could save your life treat it with respect at all times.