Sea-doo 2001 GS, Shop Manual

Page: 294 / 456

Section 08 ELECTRICAL SYSTEM
Subsection 05 (INSTRUMENTS AND ACCESSORIES)
SMR2000-024_08_05A.FM
08-05-7
Accuracy of gauge can be checked with a potenti-
ometer.
– Disconnect 2-circuit connector housing of
BROWN/BLACK and BROWN/WHITE wires of
gauge.
– Connect potentiometer test probes to BROWN/
BLACK and BROWN/WHITE wires of gauge.
– Adjust potentiometer to the resistance values
as per following chart to test accuracy of gauge.
NOTE: Gauge must be activated to obtain a read-
ing.
If gauge is not within the specifications, replace it.
Fuel Baffle Pick Up Sender
All Models Except GTX RFI and GSX RFI
The baffle pick-up has an integrated fuel sender.
To verify fuel sender, a resistance test should be
performed with a multimeter allowing the float to
move up through a sequence.
1. Pick up tube
2. Fuel sender
3. Baffle pick-up
The resistance measured between PINK/BLACK
and PINK wires must be in accordance with fuel
level (measured from under the flange) as speci-
fied in the following charts.
RESISTANCE (
Ω)
GAUGE NEEDLE
POSITION
24.3 - 45°
42.2
60.1
78.9
95.8 0°
113.7
131.6
149.4
167.3 + 45°
VTS
Bombardier
F01H0EA
+ 45°
0°
– 45°
FUEL LEVEL AND RESISTANCE
(GTS)
FUEL LEVEL
(MM)
RESISTANCE
(
Ω
)
From 257.9 ± 5 and more 0 + 2.2
From 234.4 to 257.8 ± 5 17.8 ± 2.2
From 200.9 to 234.3 ± 5 27.8 ± 2.2
From 167.4 to 200.8 ± 5 37.8 ± 2.2
From 134 to 167.3 ± 5 47.8 ± 2.2
From 100.5 to 133.9 ± 5 57.8 ± 2.2
From 67 to 100.4 ± 5 67.8 ± 2.2
From 40.1 to 66.9 ± 5 77.8 ± 2.2
From 0 to 40 ± 5 89.8 ± 2.2
F01F20A
1
2
3
www.SeaDooManuals.net