Sea-Bird Electronics SBE 45 MicroTSG, User Manual, Page: 81 / 143

Section 3: Setting Up System SBE 45 Interface Box
16
Output Format Command
Format=x
x=0 : Output standard format (default)
t1=ttt.tttt, c1=cc.ccccc, s =
sss.ssss, sv=vvvv.vvv, t2 =
ttt.tttt, lat = DD MM.MMMM W,
lon = DDD MM.MMMM W, hms =
HHMMSS, dmy = DDMMYY
x=1
: Output custom format for Kongsberg
EM 300 Multibeam Echo Sounder
tt.ttt vvvv.v
Sampling Commands
Start
Start transmitting data.
Stop Stop transmitting data.
Diagnostic Command
*EETest
Test EEPROM; reset baud rates to defaults
(new bauds take effect on next power up).
Example: (user input shown in bold)
S> *eetest
wr: 128
. .
wr: 1920
rd: 256
. .
rd: 1792
passed EEprom test
S>
Note:
Interface Box starts transmitting data
automatically when power is turned on
and stops when power is removed.
Use
Stop to stop transmitting data
temporarily while setting up the
instruments, and then restart
transmitting data by sending
Start .
Note:
See Data Output Format in Section 2:
Interface Box Description for details.
•
Format=1 is not compatible with
Seasave real-time data acquisition
software or SBE Data Processing
post-processing software.
78