Appendix C: UK Statutory Requirements - Page 25
SPOT 3 User's Guide
Appendix C: UK Statutory Requirements
Approval Requirements
Note 1:
It is the SPOT and not the
host PC which is approved.
Note 2:
This document forms part of
the approval.
The approval of SPOT is invalidated if used with external
control software or external control apparatus which
causes the operation of the modem/fax/answering
machine or associated call set up to contravene the
required BABT regulatory requirements.
The approval label must not be removed from the SPOT.
Power requirement
The maximum power taken from the power supply unit is
+5v dc. at 500 mA.
Safety requirements
The modem must only be installed as detailed in this
manual. Other usage will
invalidate any approval given to
this apparatus if as a result it ceases to comply with
EN60950 & EN41003.
Interconnection directly, or by way of other apparatus of
ports marked "SAFETY WARNING; See instructions for
use", with ports marked or not so marked may produce
hazardous conditions on the network and advice should
be obtained from a competent engineer before such a
connection is made.
Description of Port Types
Ports for connection of other apparatus (including phone
port).
Type of circuit
Port Location
Port Description
SELV
Base of phone
+5V Power source
SELV
End of serial cable
RS232 Port
TNV
End of line cable
Telecommunications network
Interconnection circuits should be such that the equipment
continues to comply with the requirements of 4.2 of EN
41003 for TNV circuits and 2.3 of EN 60950 for SELV
circuits, after making connections between circuits.
Summary of Contents for SPOT 3
Page 1: ...SPOT 3 User s Guide By SDX Business Systems Limited 38GDE00001SCA Issue 2...
Page 2: ......
Page 4: ......