SDX Audio SPOT 3, User Manual

Page: 17 / 36

Working with PC Applications - Page 13
SPOT 3 User's Guide
Windows Cardfile
To run Cardfile:
Click on the Cardfile icon,
normally found in the
Accessories group.
Microsoft supply Cardfile as a standard part of Microsoft
Windows 3.1/3.11. You can use it to store information in
simulated card indexes
(refer to your Windows User Guide)
.
A typical use is storing numbers for dialling by SPOT, ie. a
card index of addresses or business contacts.
Cardfile Setup
Before dialling numbers from Cardfile, you must tell it
about SPOT. Cardfile saves the settings for all future calls.
To setup Cardfile for SPOT:
1. Start Cardfile and press
F5
or click on
Card
and then
Autodial
.
2. Click on
Setup >>
.
3. For
Dial Type
select
Tone.
4. For
Baud Rate
select
2400
.
5. Set the
Port
to the serial (COM) port to which your SPOT
is attached.
6. If your calls are always prefixed with the same
number(s), you can enter this in the prefix box. To then
dial the prefix ensure that there is a
X
next to
Use Prefix
.
7. To save the setup, click on
OK
(otherwise click on
Cancel
).