Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
66
is in the bucketing position in order to realize the set level automatically function and increase the
efficient of the whole vehicle.
Lock automatically function:
When leveling the ground, place the control handle in the
floating position, and the control handle is locked by the electromagnetic force to realize the lock
automatically; Take the control handle from the floating position, it returns to the neutral position
automatically to increase the efficient of the whole vehicle.
z
Brake Pedal
The Brake Pedal controls the brake of the vehicle. Refer to
1.1 General View of Controls
and Gauges Figure3-1
、
3-2
in this chapter.
z
Accelerator Pedal
This pedal controls the acceleration of the engine. Refer to
1.1 General View of Controls
and Gauges Figure3-1
、
3-2
in this chapter.
The engine speed can be freely regulated between idle and full speed.
z
Parking Brake Switch
This switch is on the right operator box and it is used for the parking brake. Pull this switch to
engage the parking brake. Rotate the switch clockwise and the button springs back to release the
parking brake.
z
Flameout Control Soft Knob(if assembled)
This soft knob is on the cover of the heater which on the right side of the seat. Pull this knob and
keep for several seconds, will put out an engine flame.
1.2.5 Cab Door Locking Bar
Outside Cab Locking Bar:
Open the left
and right door to 180° and the orientation
lock on the door will touch the outside lock
of the cab and the door will be locked
outside the cab. Turn the control bar
downward and it will unlock.
Inside Cab Locking Bar:
When the lock of
the cab is in the locked positions, the door will be locked automatically after closing the door. Insert
key outside the cab. Turn 180°clockwise and pull out key. Pull the handle outside the cab and the cab
door will open. Turn the lock bar upward and it will open.
1.2.6 Frame Locking Bar
△
! WARNING
