Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
60
Pre-heat Indicator Lamp:
The lamp will come on if start switch is turned to preheat position
when machine is equipped with cold start equipment; the lamp will be off if start switch is turned
to other position.
Oil Pressure Warning Lamp:
The lamp will come on immediately if the start switch is turned
on. It will go off immediately after the engine is started. Otherwise it means the level of lubricant is
too low or there is some problem with the lubricant system. Then shut the engine and check it.
Charging Indicator Lamp:
The lamp will come on if the start switch is turned on. It will go off
immediately after the engine is started. Otherwise it means there is some problem with storage battery.
Please examine and repair it.
Power Cut Indicator Lamp:
The lamp will come on if the power is cut off, and it will go off if
the power is not cut off.
Emergency Steering Indicator Lamp:
The emergency steering function is selected to install.
When the wheel loader is steered emergently, the lamp will come on if the emergency steering pump
works.
Parking Brake Indicator Lamp:
If the brake air pressure is normal, the lamp will come on
when the parking brake switch is pushed down. The lamp will go off when the parking brake switch
springs back; the lamp will also come on if the brake air pressure is low.
Brake Air Pressure Alarm Lamp:
The lamp will come on for a warning if the brake air
pressure is below 0.4MPa.
High Beam Indicator Lamp:
The lamp will come on if the high beam is used in the front head
light. The lamp will go off if the low beam is used in the front head light or the front head light is off.
Computer Box Working Indicator Lamp:
The ZF or 4WG180 gearbox is selected to install,
the indicator lamp will come on if the starting switch is on (ON), otherwise, please stop to exclude the
error.
Fuel Prefiltration Indicator Lamp:
The lamp will come on when the fuel preliminary filter is
