Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
64
turns to the ‘ ’ position. Please shut the power switch if
park the vehicle for a long time.
z
Radio and CD Player Control Panel(if assembled)
This switch is at the right side of the ceiling cab, and for
the details please refers to
Radio and CD player
Assembly & Operation Manual
. Radio wiring is
reserved for the uninstalled machine. Ask the professionals
to install.
1.2.3 Steering Wheel
The steering wheel and steering gear are connected. Turning the steering wheel clockwise, the
machine turns right; turning the steering wheel anticlockwise, the machine turns left.
The features are listed below:
z
The rotation angles of the steering wheel and the machine are not equal. If the steering wheel is
continuously turned; the machine rotation angle will increase until at the needed position.
z
The faster the steering wheel turns, the faster the machine turns.
z
The steering wheel will not automatically come back after turning, the turning angle of the
machine will be kept. After finishing turning the machine, turn the steering wheel in the reverse
direction to keep the machine moving in a straight direction.
1.2.4 Control Levers and Pedals
z
Shifting Control Lever
Refer to
1.1 Control Systems and Gauges Figure3-1
、
3-2
in this chapter
.
This lever controls the direction and traveling speed of the machine.
The gear box of this machine has four forward and three reverse gears.
Place the speed shifting control lever in the proper position and control the accelerator pedal to
obtain the desired speed.
Place the speed shifting control lever in the N position which is the neutral gear; Put the control
lever forward to 1 position can obtain the forward gear
Ⅰ
,
when
turn it to 2 position can obtain
the forward gear ,
Ⅱ
when
turn it to 3 position can obtain the forward gear
Ⅲ
,
when
turn it to 4
position can obtain the forward gear
Ⅳ
.
Put backward to 1 position can obtain the reverse gear
Ⅰ
,
when turn it to the 2 position can obtain the reverse gear
Ⅱ
, when
turn it to the 3 position can
obtain the reverse gear .
Ⅲ
Before starting, put the control lever in the N position, and put it in the
P position after stopping.
z
Working Device Control Handle
