Operation & Maintenance Manual
──
LG958L/LG959 Wheel Loader
36
z
Never
stand on the top of tires because they are slippery and dangerous.
z
Stand on the mudguard of the front frame and seize the handrail to clean the front glass of the
operator cab.
8.6 Maintenance While the Engine is Working
Routine maintenance of the machine should never be done while the engine is working to prevent
injury. When it is necessary, please follow the rules below:
z
Assign an operator to sit on the seat to ensure all the maintenance people can have contact with
him so he can prepare to shut the engine when requested.
z
Never
touch a high temperature part such as tail pipe and silencer to prevent injury.
z
Be careful if the repair space is near the rotation part. There is the danger to be volumed .
z
Do not touch any lever (or handle). If necessary to touch it, warn the others to go to a safe place.
z
Never
let any tool or body part touch the fan leaf or fan belt. Otherwise serious hurt may occur.
z
Do not make adjustments unless fully trained to do so.
8.7 Do Not Let Anything Fall into the Inner Part of the Machine
z
When opening the examination window and the oil filling port of the oil tank, make sure that
nothing (such as nuts, bolts, cotton yarn or tools) falls into the inside of the machine. If it happens,
the machine may be disabled. Pick out the fallen pieces safely.
z
Do not carry any unnecessary tools or parts in your pockets during examination of the machine.
8.8 Cleaning
z
Wear the anti-slide shoes to prevent sliding when cleaning the machine. Wear protective clothes
when using high pressure water to clean the machine.
z
Clean routinely to prevent dirt or mud splashing into the eyes or slippage caused by oil on the
machine.
z
Do not use a flammable scour when cleaning the machine.
z
Shut the engine to clean the inner part of the machine, put all the levers (or handles) in the middle
position, push the parking brake switch and keep it in the braked position.
z
Do not let water enter an electric part (such as sensor, wire connector) or operator cab. If so, the
operation may be disabled and the electric circuit may be damaged.
z
Wear protect clothes and glasses when using compressed air to clean the filter mesh.
