SDJ SG HYH900, User Manual

Page: 22 / 28

22
5.2 – SMOKE MODE
FUNCTION BUTTON:
Press FUNCTION BUTTON one time, the display will show “Wait Time Set Mode” . With
UP/DOWN buttons it will be possible to set the interval time from 1 to 600 seconds. The
setting will be auto-saved.
Press FUNCTION BUTTON two times, the display will show
“Start Time Set Mode” . With
UP/DOWN buttons it will be possible to set the output time from 1 to 600 seconds. The
setting will be auto-saved.
Press FUNCTION BUTTON three times, the display will show
“Timer Smoke Volume Out” .
With UP/DOWN buttons it will be possible to set the output volume of haze from 1% to
100%. The setting will be auto-saved.
Press FUNCTION BUTTON four times, the display will show
“Fan Adjusting Volume” . With
UP/DOWN buttons it will be possible to set the speed of fans from 1% to 100%. THIS
FUNCTION IS NOT ACTIVE IN SMOKE MODE.
Press FUNCTION BUTTON five times, the display will show
“The DMX device address set” .
With UP/DOWN buttons it will be possible to set the DMX address from 001 to 510. The
setting will be auto-saved.
UP BUTTON: used to increase the values.
DOWN BUTTON: used to decrease the values.
TIMER BUTTON: it activates the settings inside the submenu
Wait Time Set Mode and Start
Time Set Mode , by starting and stopping the output of the smoke, following the parameters
indicated in the relative submenu. In order to exit from the Timer mode, press the button .
VOLUME PUMP/FUN BUTTON: it activates the manual output of the smoke. It will be possible
to adjust the volume output with the UP/DOWN buttons.
BUTTON: it stops any selected function or it allows to exit from any submenu.
5.3 – DMX MODE
Channel Function Value Description
1 Smoke output 000 – 255 Smoke output from min to max
2 Fans speed 000 – 255 Fan speed from min to max
3 Smoke / Output
selection 000 – 127 Smoke mode
128 – 255 Hazer mode