SDJ SG HYH900, User Manual

Page: 21 / 28

21
5.1 – HAZER MODE
FUNCTION BUTTON:
Press FUNCTION BUTTON one time, the display will show “Wait Time Set Mode” . With
UP/DOWN buttons it will be possible to set the interval time from 1 to 600 seconds. The
setting will be auto-saved.
Press FUNCTION BUTTON two times, the display will show
“Start Time Set Mode” . With
UP/DOWN buttons it will be possible to set the output time from 1 to 600 seconds. The
setting will be auto-saved.
Press FUNCTION BUTTON three times, the display will show
“Timer Smoke Volume Out” .
With UP/DOWN buttons it will be possible to set the output volume of haze from 1% to
100%. The setting will be auto-saved.
Press FUNCTION BUTTON four times, the display will show
“Fan Adjusting Volume” . With
UP/DOWN buttons it will be possible to set the speed of fans from 1% to 100%. The setting
will be auto-saved.
Press FUNCTION BUTTON five times, the display will show
“The DMX device address set” .
With UP/DOWN buttons it will be possible to set the DMX address from 001 to 510. The
setting will be auto-saved.
UP BUTTON: used to increase the values.
DOWN BUTTON: used to decrease the values.
TIMER BUTTON: it activates the settings inside the submenu
Wait Time Set Mode and Start
Time Set Mode , by starting and stopping the output of the smoke, following the parameters
indicated in the relative submenu. In order to exit from the Timer mode, press the button .
VOLUME PUMP/FUN BUTTON: it activates the manual output of the smoke. It will be possible
to adjust the volume output and the speed of the fans with the UP/DOWN buttons and
adjusting the relative parameter indicated with the (*) symbol. It is possible to change the (*)
symbol in the selected parameter by pressing the FUNCTION button. In order to stop the
output of the smoke, press the button .
BUTTON: it stops any selected function or it allows to exit from any submenu.