SDJ SG HYH900, User Manual

Page: 15 / 28

15
2. - SAFETY INSTRUCTIONS
Caution! This product is not suitable for household illumination.
Please read this manual before installing and applying power to the equipment, follow the
safety precautions listed below and observe all warnings in this manual and printed on.
Please contact a PROEL distributor for assistance with any questions about how to activate
the equipment safely. Contact a qualified technician for any maintenance work not described
in this manual.
Do not modify the fixture or install accessories and upgrade kits that are not the SAGITTER
original ones.
People involved in the installation and maintenance of the device must:
- Be qualified
- Follow the instructions of this manual in the theaters, in the halls, in the places where the
events take place, etc.
CHECKS BEFORE INSTALLATION
Make sure all the parts for fixing the product are in good condition.
Make sure that the anchor point is stable before positioning the product.
The safety cable must be properly attached to the device and fixed to the supporting
structure so that, in case of failure of the primary supporting system, it has the lowest
possible fall of the device.
If the safety cable wear, must be replaced with an original spare.
MINIMUM DISTANCE FROM FLAMMABLE MATERIALS
The product must be positioned so that any flammable material is at least 3 meters from any
point of the surface of the device. Never place filters or other materials over the lens or on
the optical axis.
MOUNTING SURFACES
Don’t mount the device on flammable or explosive or exposed to high temperatures
surfaces. The smoke machine can cause condensation, don’t use the machine on smooth
floors to avoid the risk of accidental falls.
The machine can work normally with a maximum tilt +/- 30° ref.
pic.1
Don’t place the device in a non-ventilated location, this may cause a
fuse breaking and the machine will not heat up. Don’t use the product
if the ambient relative humidity is above 80%.
Pic.1