13
STEP 2.
Set the Analyzer.
The following table provides an overview of the available settings.
Stage
Setting
Option
1
Beep
On, Off
2
Year
YYYY
3
Date Format
m-d, d-m
4
Date (Month & Day)
mm-dd, dd-mm
5
Time Format
12h, 24h
6
Time
Hour &Minute
7
Auto Printing
On, Off
8
Printing Page
P-1, P-2
9
HbA1c Unit
NGSP, IFCC, mono-S, JDS
10
eAG Unit
mg/dL, mmol/L
11
Lipid Unit
mg/dL, mmol/L
12
Bluetooth with PC *
On, Off
13
Bluetooth with Printer *
On, Off
14
Re-pairing with Printer *
On, Off
*Only for 03MA20 (Bluetooth supported model)
Stage 0. Entering Set Mode
1)
Press the SET/PRT button (on the top side of the analyzer) for three
seconds to enter the setting mode after turning an analyzer on or at the
standby state. If you want to leave the setting mode (this is only possible
if a date and time setting is made), press the SET/PRT button shortly.
2) If the displayed setting is done, you can continue directly to the next
step by pressing the Enter button.
3) Press the left (
) or right (
) button to change the currently flashing
setting. You can press the left (
) or right (
) button as much as you
need(or keep pressing it) to reach the desired setting(value).
4)
Press the Enter button again to confirm (store) the current setting and
go to the next step. You can only move forward through the setting
mode. Moving backwards is not possible. Corrections can only
be made by repeating the settings. The setting procedure can be
terminated at any time by pressing the SET/PRT button. The settings
made up to that point will be stored.
