- 11 -
EN
11
38
Selecting a Base
This function allows you to select a base from
those already registered to the handset. You can
access the options by scrolling the menu.
3. Press
to choose the
,
press the key.
4. You can use
to select the base
you want, then press the
key. If you select
a non-existent base, the handset will sound a
warning tone.
5. The display will show
. Press the
key to confirm. A confirm tone will be
SELECT BS
SELECT BS X
1. Press the key.
2. Press
or
key repeatedly to choose
menu, then press the key.
or
key
or
key
HS
SETTING
heard.
HS Reset
This function allows you to reset the handset
settings to the factory default.
3. Press
to choose the
menu, press the
key. You will be prompted
to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the
key. If the PIN code is
validated all handset settings will return to the
factory default, otherwise a warning tone will
be heard and the settings will remain.
After resetting, the handset will return to
standby mode.
HS DEFAULT
Result:
1. Press the key.
2. Press
or
key repeatedly to choose
menu, then press the key.
or
key
HS
SETTING
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
Installing Batteries (continued)
Slide the battery cover in the direction of the
arrow and pull it out.
Insert new batteries as indicated, matching
correct polarity (+,-).
You can install two
before using the outdoor station.
C size batteries (not supplied)
2.
1.
Outdoor station
3. T o
r e p l a c e
t h e
b a t t e r y
cover, slide the cover up
until it snaps in place.
Reversing
the
orientation
may
damage the unit.
When replacing the batteries, always
use
good
quality
C
size
alkaline
batteries.
If you have installed the batteries,
you do not need to connect the DC
positive input and negative input.
Notes
:
