SCS CL 3622 User Manual Download Page 13

Page: 13 / 88

- 13 -

dans

détail…

Entretien et maintenance

Interphone audio par

Blyss

Remplacement des piles de la platine

de rue

Remplacement des piles du combiné

> Utilisez 2 piles rechargeables 1,2V NiMH.

> Attention : il y a risque d'explosion si les batteries sont

remplacées par des batteries de type incorrect.

> Mettez au rebut les batteries conformément aux

instructions.

> Si vous avez choisi de ne pas utiliser le module de

commande de gâche et d’alimenter la platine de rue par

piles, utilisez 2 piles alcalines 1.5V de type C LR14.

■ Remplacement des piles de la platine de rue

Utilisation

Selecting a Base

This function allows you to select a base from

those already registered to the handset. You can
access the options by scrolling the menu.

3. Press

to choose the

press the key.

4. You can use

to select the base

you want, then press the

key. If you select

a non-existent base, the handset will sound a
warning tone.

5. The display will show

. Press the

key to confirm. A confirm tone will be

SELECT BS

SELECT BS X

1. Press the key.

2. Press

key repeatedly to choose

menu, then press the key.

key

SETTING

heard.

HS Reset

This function allows you to reset the handset

settings to the factory default.

3. Press

to choose the

menu, press the

key. You will be prompted

to enter the PIN code.

4. Enter the PIN code (the default one is 0000),

then press the

key. If the PIN code is

validated all handset settings will return to the

factory default, otherwise a warning tone will
be heard and the settings will remain.

After resetting, the handset will return to

standby mode.

HS DEFAULT

Result:

1. Press the key.

2. Press

key repeatedly to choose

menu, then press the key.

key

SETTING

MENU/R

Installing Batteries (continued)

Slide the battery cover in the direction of the
arrow and pull it out.

Insert new batteries as indicated, matching
correct polarity (+,-).

You can install two
before using the outdoor station.

C size batteries (not supplied)

Outdoor station

3. T o

r e p l a c e

t h e

b a t t e r y

cover, slide the cover up

until it snaps in place.

Reversing

the

orientation

may

damage the unit.

When replacing the batteries, always
use

good

quality

size

alkaline

batteries.

If you have installed the batteries,
you do not need to connect the DC
positive input and negative input.

Notes

Selecting a Base

This function allows you to select a base from

those already registered to the handset. You can

access the options by scrolling the menu.

3. Press

to choose the

press the key.

4. You can use

to select the base

you want, then press the

key. If you select

a non-existent base, the handset will sound a
warning tone.

5. The display will show

. Press the

key to confirm. A confirm tone will be

SELECT BS

SELECT BS X

1. Press the key.

2. Press

key repeatedly to choose

menu, then press the key.

key

SETTING

heard.

HS Reset

This function allows you to reset the handset
settings to the factory default.

3. Press

to choose the

menu, press the

key. You will be prompted

to enter the PIN code.

4. Enter the PIN code (the default one is 0000),

then press the

key. If the PIN code is

validated all handset settings will return to the

factory default, otherwise a warning tone will
be heard and the settings will remain.

After resetting, the handset will return to

standby mode.

HS DEFAULT

Result:

1. Press the key.

2. Press

key repeatedly to choose

menu, then press the key.

key

SETTING

MENU/R

Installing Batteries (continued)

Slide the battery cover in the direction of the
arrow and pull it out.

Insert new batteries as indicated, matching

correct polarity (+,-).

You can install two

before using the outdoor station.

C size batteries (not supplied)

Outdoor station

3. T o

r e p l a c e

t h e

b a t t e r y

cover, slide the cover up
until it snaps in place.

Reversing

the

orientation

may

damage the unit.

When replacing the batteries, always
use

good

quality

size

alkaline

batteries.

If you have installed the batteries,
you do not need to connect the DC
positive input and negative input.

Notes

(non fournies).

Summary of Contents for CL 3622

























































































Search results

Summary of Contents for CL 3622

Reviews:

Related manuals for CL 3622

Brands by name

Popular brands

SCS CL 3622, User Manual

Search results

Summary of Contents for CL 3622

Reviews:

Related manuals for CL 3622

Brands by name

Popular brands