- 16 -
EN
16
33
Making a Call
You can enter the desired phone number in
standby mode, which allows you to make
corrections
before
dialing.
Follow
these
steps:
1. Enter a telephone number (up to 32
digits). Check it. You can also use the
key to insert a pause.
1. Pick up the handset and press the key.
3. To end the call, either press the
2. Dial a telephone number.
key
or replace the handset on the base.
Result:
The icon appears on the LCD.
Basic Functions
Note
Redial
:
To make a call to the last number you dialed,
use the
feature. For details, see page
20.
Note
:
If you make a mistake while entering a
number, press the
key to clear the
last digit.
2. When the number appears correctly, press
the key.
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the key.
Part One: Cordless Phone
BS Settings
Terminate HS
This function allows you to delete a handset
registration from the base.
3. Press the
key again to choose
. The display shows "
" to prompt you
to enter the PIN Code (The default PIN Code is
"0000"). Then press the key.
4. Use the
to select a handset. If
you select the current handset or a non-
existent handset, a warning tone will be heard.
5. Press the
to confirm, and the selected
handset
will
behave
according
to
the
unregistered condition.
TERMINATE
HS
PIN?
key
1. Press the key.
2. Press
or
key repeatedly to choose
menu, then press the key.
or
key
BS
SETTING
Flash Time
You can select to change the Flash time by the
following steps:
1. Press the key.
2. Press
or
key repeatedly to choose
menu, then press the key.
3. Use
or
key to choose the
menu. Press the key.
4. The display shows the current setting. Use the
or
key to select
/
, press
the key.
BS
SETTING
FLASH TIME
SHORT LONG
C/
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
MENU/R
