83
7. The receiver reboots and upgrades itself after the file is uploaded successfully. Firmware
upgrade status is displayed on the connected display.
8. When the receiver returns to the
Wireless Display Ready to Connect
Screen, the
receiver has been upgraded.
Warning! Do NOT power off your receiver during the upgrade process. The upgrade
will take some time. Please be patient.
VI.1.2 Updating Firmware from the Internet
Users can wirelessly update the receiver’s firmware with the online update server.
To upgrade your receiver from the Internet, follow this procedure:
1. Ensure the receiver is connected to a network that has access to the Internet.
2. Log into Local Management Interface on ScreenBeam 1100 Plus, and go to the
Firmware Upgrade
tab page by clicking the
Firmware Upgrade
tab.
On the
Firmware Upgrade
tab page, users can check the current firmware version in
the
Firmware Version
section.
3. Click the
Check for Updates
button next to the
From the Internet
box. If there is new
firmware update available, a message will show in the
From the Internet
box as “Newer
Summary of Contents for 1100 Plus
Page 23: ...19 Windows 10 iOS macOS 5 Select duplicate or extended screen mode if prompted...
Page 26: ...22 connected display device Windows 10 Android...
Page 33: ...29 Windows 10 iOS macOS 7 Select duplicate or extended screen mode if prompted...
Page 58: ...54 4 The receiver reboots and new setting takes effect after the reboot...