64
3.
Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
V.3.6.5
Waking up the Receiver
When the receiver runs screen saver or when its HDMI/VGA port output is turned off, it can
be waked up by any one of two events: scanning and connecting.
Note
: The
Wake Up
feature is available when
HDMI/VGA Port Power management
is set
to
Screensaver
or
Display Off
.
To set up the receiver’s wakeup feature, follow this procedure:
1.
Go to the
Features
tab page by clicking the
Features
tab.
2.
Go to the
Display Setting
section, and set the
Wake Up
feature to
On Scan
or
On
Connect
.
On Connect
: The receiver will wake up from sleep or screen saver only when a
source device is connecting.
On Scan
: The receiver will wake up from sleep or screen saver when it detects that
a source device is scanning.
Summary of Contents for 1100 Plus
Page 23: ...19 Windows 10 iOS macOS 5 Select duplicate or extended screen mode if prompted...
Page 26: ...22 connected display device Windows 10 Android...
Page 33: ...29 Windows 10 iOS macOS 7 Select duplicate or extended screen mode if prompted...
Page 58: ...54 4 The receiver reboots and new setting takes effect after the reboot...