ScreenBeam 1100 Plus, User Manual, Page: 81 / 107

77
4.
Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
V.3.10 Receiver Management Access Settings
This section introduces settings for receiver management.
V.3.10.1
Specifying ScreenBeam CMS for the Receiver
To specify a CMS server for the receiver, follow this procedure:
1.
Go to the
Management Access
tab page by clicking the
Management Access
tab.
2.
Go to the
Central Management System Settings
section, and define the
CMS Server
and the
CMS Communication Port
.
 CMS Server
: It is the IP address or the FQDN/hostname/domain name/alias name (if a
DNS server and an DHCP server are properly configured) of the server that hosts the
ScreenBeam CMS. It supports a domain with six labels at most.
Note
: It is recommended to use DNS configuration for CMS Server.
 CMS Communication Port
: It is the communication port of the ScreenBeam CMS. The
port range is from 5000 to 65535. By default, 7237 is used.