Version 3
18
|
Methods Tab
Name is used for information purposes only.
Select from the pull down tab for a list of
reagents listed. Vol (ml) (highlighted grey) is
for information purposed on a numeric value
maybe added here.
Add allows the selection of reagent
used in the method being programmed.
This is only for information purposes. Input
the volume or the mass used.
Add allows for the 2
nd
or 3
rd
reagent used for
the method to be added.
By pressing Edit in Reagents a new window
will appear that used to add a new reagent
not on the list
Delete is used to remove a reagent from the
list
Add in Method Parameters is used to add
a 2
nd
or 3
rd
temperature profile of ‘time to
temperature’ and ‘time at temperature’. The
set point temperature must also be inputted.
Save is used to save the method
Cancel will return to the main page without
saving the values
Save to USB will save the information on a
USB stick if one is installed in the 5
th
USB
connector on the back of the controller. It
saves the information in PDF format.
Add moves the inputted information from
the right hand side to the left hand side. This
makes this information available from the pull
down tab on the Methods creation tab.
Delete removes the highlighted reagent from
the Left hand side list.
OK returns the operator to the method page
and saves the inputted or deleted information
Cancel returns the operator to the methods
page without saving.
200
