5
2 Cautions
★
The working voltage of the camera is 6V. The camera is supplied by four
AA batteries.
★
Please install batteries according to shown polarity.
★
Please unlock the write-protect before inserting the SD-card.
★
Please insert the SD-card when the power switch is at
OFF
position before
testing the camera. The camera has no internal memory for saving images
or videos. If no SD-card is inserted, the camera will shut down
automatically after a continuous indication sound.
★
Please do not insert or take out the SD-card when the power switch is at
ON
position.
★
It is recommended to format the SD-card by the camera when used at the
first time.
★
In the
TEST
mode, the camera will shut down automatically after 3
minutes if no operation is done. Please turn on the power again if you want
to continue to work with the control.
3 Easy Operations
3.1 Power Supply
Use 8 or 4 AA batteries or 6v external battery for power supply.
Install the fully charged batteries into the depot according the polarities
sign shown. The following batteries with 1.5V output can be used:
1. High-density and high-performance alkaline batteries
(Recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
When in low-battery state, camera will be automatically shut down after
the indication LED flashing for a while. Please change the batteries in time.
3.2 Insert the SD-card
The camera has no internal memory for saving images or videos. If no
SD-card is inserted or SD-card is locked, the camera will shut down
automatically after a continuous indication sound.
3.3 Power on and Entering into the ON Mode
The Camera has three basic operation modes:
1.
OFF mode
: to turn off the camera.
2.
TEST mode
: to set operational parameters, or to playback the
photos or video clips via display screen or via TV.
3.
ON mode
: to work under surveillance state.
After switching the camera to ON position, the motion indication LED
(red) will blink for about 10s. This time interval is for you to make the Camera
ready for automatic surveillance operation, e.g., to close the bottom cover and
to lock it, to fix the camera on a tree and to walk away. After entering into the
ON mode, no manual controls are needed and possible. The Camera will take
pictures or videos automatically according to the previous programmed
settings, when human or animals enter into the monitoring region.
