Scout Guard DTC-560K, User Manual

Page: 12 / 17

11
c) Press “ ► ” to select On .
d) Press OK to enter into submenu.
e) Press “ ► ” to select item, press “ ▲ ” or “ ▼ ” to change the value
until the start time changes to 8 and the stop time changes to 17.
f) Press OK to save all current setting and the option will be
un-highlighted.
Press
MENU to return to previous menu.
4.1.12
Set Time Stamp
This parameter defines whether the date and time be stamped in the
pictures and video clips or not. The following shows you how to set time
stamp as “Off” provided that the previous value is “On” in MENU state.
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Time Stamp .
c)
Press “ ► ” to select Off .
d)
Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.13
Reset to Default Settings
To reset the setting to the default values, the steps are as follows:
a)
Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Reset .
c) Press OK to reset to default settings and return to info display.
Press MENU to cancel setting and return to info display.
4.2 Default Settings and Live Monitoring
Please refer to table 1 for the default settings:
Parameter name Default Other settings
Camera Mode Camera Video
Photo Size 8M Pixel 5M Pixel,1.3M Pixel
Photo Burst 1 Photo 2 Photos, 3 Photos
Video Size 640×480 320x240
Video Length Avi 10 Second 1-60 seconds
PIR Sensitivity Normal High, Low,OFF
PIR Interval 1 Minute 0-59 seconds, 1-60 minutes
Timer Interval OFF 10 seconds to 8 hours
Timer Switch Off On (00:00 – 23:59)
Time Stamp On Off
Table 1: Default settings of the
Camera
4.3 Firmware upgrade
This camera is provides an upgrading function for the users. Upgrading is