Scout Guard DTC-560K, User Manual

Page: 10 / 17

9
c) Press OK to enter into submenu.
d) Press “ ► ” to select item, press “ ▲ ” or “ ▼ ” to change the value.
e) Press OK to save all current setting and return to info display.
Press MENU to return to info display.
4.1.6
Set Photo Burst
This parameter affects the number of pictures taken for each triggering in
Camera mode. It has three values: “1 Photo” “2 Photos” and “3 Photos”. Its
default value is “1 Photo”.
The following shows how to set continuous capture number to 3 Photos
provided that the previous option is 1 Photo :
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Capture Number .
c) Press “ ► ” to select 3 Photos .
d) Press OK to save the current setting and the option will be
un-highlighted.
Press
MENU to return to info display.
4.1.7
Set Video Length
This parameter is effective and can be adjusted only when the device in
the video mode for the LIVE mode. Its value extends from 1 to 60 seconds
with a step of one second. The default value is 10 seconds. Press
“ ◄ ” and
“ ► ” to decreases or increases the value by 1 second.
The following shows how to set video length to 15 Seconds provided that
the previous value is 1 Seconds :
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Video Length .
c) Press “ ► ” to increase to 15 Seconds .
d) Press OK to save the current setting and the option will be
un-highlighted.
Press
MENU to exit.
4.1.8
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are four
parameters: High, Normal, Low and PIR off. The default value is “Normal”.
The higher degree indicates that the
Camera
is more easily to be triggered by
motion, taking more pictures or recording more videos. It is recommended to
use high sensitivity degree in room or environment with little interference, and
to use lower sensitivity for outdoor or environment with lots of interference like
hot wind, smoke, near window etc. Furthermore, the sensitivity of the PIR is
strongly related to the temperature. Higher temperature leads to lower
sensitivity. Therefore it is suggested to set a higher sensitivity for high
temperature environment.
The following shows how to set PIR sensitivity as Low provided that the
previous option is Normal .
a) Press MENU to display the setting menu.
b) Press “ ▲ ” or “ ▼ ” to select Sensitivity .
c)
Press “ ► ” to select Low .
d)
Press OK to save the current setting and the option will be