8
Connecting to a TV
To connect to a TV or Monitor:
1.
Connect the supplied AV phono cable to the connector labeled
‘Video Out’
and to the TV’s Auxiliary Video input.
2.
Connect the other branch of the supplied AV phono cable to the connector
labeled
‘Audio Out’
and to the TV’s Auxiliary Audio input.
Tip:
If your TV or Monitor has stereo inputs, use the left channel input.
Connecting a Pan Tilt Zoom Camera
To connect a PTZ camera:
1.
Connect one end of a video cable with BNC connectors to the video input on
the back of the eyesite 550 unit labeled Video Input. Then connect the other
end of the video cable to the PTZ camera.
2.
Connect the power adaptor supplied with the camera from a wall outlet to the
power jack on the back of the PTZ camera.
3.
Connect the camera control cable to the camera and the serial connector on the
other end to the serial port on the back of the eyesite 550 labeled RS-422/485
(RJ-45) or RS-232 (DB9). You will need to configure the data port in the Data
Options Menu.
Note:
When connecting audio signals to the eyesite 550, make sure each audio
source corresponds with the video source from the same camera.
Summary of Contents for eyesite550
