Scott Edge Reinforcer, Instruction Manual

Page: 61 / 117

4 Maintenance
4--12
Edge Reinforcer Issue 1
4.1.5 Packaging Instructions For Returning Assemblies to Factory for Repairs
These assemblies can be easily damaged if they are not packed properly. The two units should be wrapped
separately and packed tightly into a carton. This carton should be placed in a larger carton with plenty of
padding all around making sure it is tightly packed so that it will not be damaged during shipping.
Note !
ALWAYS RETURN BOTH THE UPPER & LOWER ASSEMBLIES SO THEY CAN BE CHECKED
TOGETHER.
Fig. 4-18. Remove Cross Over Bar
4.1.6 Instructions for Installing the
Two Cut--off Assemblies
Step: 1. Remove the cross over bar.
Fig. 4-19. Remove the Top Cover
Step: 2. Remove the top cover.