Scott Edge Reinforcer, Instruction Manual, Page: 53 / 117

4 Maintenance
4--4
Edge Reinforcer Issue 1
4.1.1 Machine Lubrication
Note !
The ball bearings used in the machine are factory lubricated and require no lubrication.
The following lubrication is required by the operator
Location Lubricant Frequency
Gears (Back of Cutting Package)
Note: Do Not Use Grease
Mobil DTE 24 Pneumatic Oil or Equive-
lant
40 Hours
Chains & Gears in Box Lubriplate Every 200 Hrs
Operators’ Lubrication Tasks -- Quick Reference Chart
Fig. 4-1. Oil Cutting Package Gears
●
Oil in back of the gears located on back side of
cutting package after every 40 hours of use.
Use the same oil as used to oil the main drive
clutch. DO NOT USE GREASE.
Note !
If it is ever necessary to clean the
gears, clean with something soft such
as a toothbrush. DO NOT SCRAPE OR
TRY TO CLEAN WITH ANYTHING
HARD SUCH AS A SCREWDRIVER OR
FILE. This will burr the gears and
cause erratic cutting.