10
6. Always at page 2 of 3, check that
VALVE
is
Carel ExV
7. Push the “Arrows up-down” to page 3 of 3,
select
PROBE S1
and push
8. Push the “Arrows up-down” till select “
ratiom.
0/45barg
” then push
again
9. With “Arrows down” go to the next steps and
check all connections as shown on display
10. Once on
END CONFIGURATION
display,
move with “Arrows up-down” to
YES
and
push
11. Push
Prg
Button and with “Arrows up-down”
write the
PWD 0066
then push
