SCORPION S Series, Operating Instructions Manual, Page: 28 / 32

28
Delete Ultrasonic, Single & Dual Stage Sensor Triggers & Pre-warn
(Option 6 on the Keypad)
Arming the security system without Ultrasonics, both the Accessory Sensors Triggers
and Pre-warn may be necessary in certain circumstances for example; if you wish to
leave people or animals inside the secured vehicle (sensible safety precautions should
be exercised if considering this action!), or if travelling on a ferry with an optional
Single Stage Tilt Sensor and/or a Dual Stage Shock Sensor fitted. This facility deletes
the Ultrasonics, both Single & Dual Stage Accessory Sensors’ triggers & Pre-warn but
allows the security system to be otherwise left fully armed. To do this is turn on the
vehicle’s ignition, type 6 on the Keypad and immediately turn off the ignition. Vacate
the vehicle, closing all doors, boot and bonnet. Now arm the security system in the
normal way. The security system will acknowledge arming with 6 flashes of the
vehicle’s hazard warning lights, instead of the normal 3 second illumination.
Note: The Ultrasonic, Single & Dual Stage Accessory Sensor triggers & Pre-warn will
be restored next time you arm the security system in the normal way.
Safety Lock/Unlock (Option 7 on the Keypad)
Many Police forces now recommend that you lock your vehicle’s doors whilst driving,
Safety Lock/Unlock prevents you from having to remember to do so. If all the doors,
bonnet and boot are closed and you turn on the vehicle’s ignition all the doors and
boot will lock. When you turn off the ignition all the doors and boot will then unlock.
To stop the doors and boot locking on a single occasion, for example if you wish to
start the engine and then vacate the vehicle, perhaps to scrape ice from the windows,
open a door and turn on the vehicle’s ignition, after 1 second the vehicle’s hazard
lights will give a single flash. It is then safe to close your door and Safety Lock/Unlock
will not lock your doors until the next time you turn the vehicle’s ignition off then on
again.
• To enable Safety Lock/Unlock turn on the vehicle’s ignition, type 7 on the
Keypad and immediately turn off the ignition. Safety Lock/Unlock will now
function as described.
•
To disable Safety Lock/Unlock turn on the vehicle’s ignition, type 7 on the
Keypad and immediately turn off the ignition. Safety Lock/Unlock is now
disabled and will not operate your door locks.
Displaying the Vehicle’s Battery Voltage (Option 8 on the Keypad)
Turn on the vehicle’s ignition, type 8 on the Keypad and immediately turn off the
ignition. The dashboard LED will flash the approximate voltage of the vehicle’s
battery (i.e. 12 flashes = 12 volts). A battery voltage below 9 volts can affect the security
system’s correct operation and the vehicle may not start. If your security system is
armed and you have power loss, the Radio Key may not operate the security system,
and your emergency override Keypad may not operate. Recharge the vehicle’s
battery if possible or contact your motoring organisation. To disable Safety
Lock/Unlock turn on the vehicle's ignition, type 7 on the Keypad and immediately
turn off the ignition. Safety Lock/Unlock is now disabled and will not operate your
door locks.
Adjusting Pre-warn Output volume (Option * on the Keypad)
To switch between loud and soft pre-warn bleeps, turn on the vehicle’s ignition, type *
on the Keypad and immediately turn off the ignition.