SCORPION S Series Operating Instructions Manual Download Page 26

Page: 26 / 32

Last Trigger Isolation

(Option 0 on the Keypad)

If after arming the security system, the Door Open Warning Bleeps continue to sound

or the alarm system repeatedly triggers for no apparent reason, yet all the doors,
bonnet and boot appear to be closed correctly, this may indicate a fault on one of the

switches that trigger the security system. On a normal security system this would

mean the entire vehicle would have to be left unprotected. The faulty switch would
result in a trigger if an attempt were made to arm the security system. To exclude the

switch causing the fault –

turn on

the vehicle’s ignition,

type 0

on the Keypad and

immediately

turn off

the ignition. Arm the security system in the normal way. If the

Door Open Warning Bleeps are active the siren will bleep as before for 15 seconds, but

the security system will no longer trigger on the troublesome circuit after this period.

You must repeat this process each time you arm the security system.

This function means that you can leave the vehicle protected on all circuits with the

exception of the faulty door, boot or bonnet switch.

Note:

Any fault should be rectified by your installing dealer as soon as possible.

Remember the vehicle is not fully protected in this situation, and one faulty door
switch may affect the protection on all other doors, depending on the make and

model of vehicle.

Delete Arm and Disarm Indication Tone

(Option 1 on the Keypad)

This feature is not available unless the Arm and Disarm Indication Tones have been

activated (for non EU member states only). Arming the security system without the

arming tone and the following disarming tone may be necessary if you wish to arm or
disarm the system late at night. To do this

turn on

the vehicle’s ignition,

type 1

on the

Keypad and immediately

turn off

the ignition. Vacate the vehicle, closing all doors,

boot and bonnet.

Now arm the security system in the normal way. When the system is disarmed, 3

warning bleeps will be heard as normal if the system has been triggered in the last
armed period.

Note:

The Arm and Disarm Indication Tones will be restored next time you arm the

security system in the normal way.

Important:

If the Arm and Disarm Indication Tones have been turned on, the security

system will no-longer comply with the requirements of 74/61 EEC.

Delete Ultrasonic Sensors

(Option 2 on the Keypad)

Arming the security system without Ultrasonic Sensor protection will be necessary if

you wish to leave people or animals inside the secured vehicle (sensible safety

precautions should be exercised if considering this action!). This facility may also be
used to provide limited protection of the vehicle if left unattended with the windows

and/or sunroof open. To do this

turn on

the vehicle’s ignition,

type 2

on the Keypad

and immediately

turn off

the ignition. Vacate the vehicle, closing all doors, boot and

bonnet. Now arm the security system in the normal way. The security system will

acknowledge arming with

2 flashes

of the vehicle’s hazard warning lights, instead of