23
Teaching New Radio Keys to the Security System
IMPORTANT NOTICE:
When teaching one or more Radio Keys into the security system all previous Radio
Keys will be erased from the system. You must always teach ALL the Radio Keys
required to operate the security system at the same time.
NOTE:
When using the Keypad, each time a button is pressed the LED on the Keypad
will flash once as confirmation. The next button should not be pressed before
this confirmation. However, you only have 2 seconds to enter the next character.
If you do not press the next character within this time period, the LED on the
Keypad will flash repeatedly, after which you must start the sequence again from
the beginning.
With the ignition switched off and the security system disarmed, type into the
Keypad the following:
Where
AAAA
represents the 4-digit PIN code and n represents the total number of
Radio Keys to be recognised by the security system (maximum 4). To confirm correct
input of your PIN code the siren will bleep after entering the last digit. The number
991 is the access code/command, which notifies the security system to accept the
new Radio Keys. Then immediately press the first Radio Key button briefly, the
dashboard LED will illuminate
red
for
1 second
and the siren will
bleep
as
confirmation that the Radio Key has been learnt, now press the second Radio Key
button briefly, the dashboard LED will illuminate
red
for
1 second
and the siren will
bleep again
, continue with the third and fourth Radio Keys (if applicable). After
pressing your final Radio Key wait 10 seconds. Finally test that all your Radio Keys arm
and disarm the security system.
Example
So for example if the PIN code is
1234
and you wish to programme in
2 Radio Keys
you would type in:
Your PIN code (siren will beep)
Notifies security system you want to programme Radio Keys
Is the number of Radio Keys that you want to programme in
Confirms you want to programme Radio Keys and will be followed by a bleep
The press the Radio Keys briefly at the appropriate time.
EXAMPLE ONLY.
Summary of Contents for S Series
Page 1: ...1 ...
Page 32: ...32 April 2022 INST011 Rev 006 ...