manualshive.com logo in svg

SCORPION S Series, Operating Instructions Manual, Page: 19 / 32

Share
Download
SCORPION S Series Operating Instructions Manual Download Page 19

 

19 

Teaching New Radio Keys & Touch Keys to the Security System 
 
IMPORTANT NOTICE: 

When teaching one or more Radio Keys into the security system all previous 

Radio Keys will be erased from the system, similarly teaching one or more Touch 
Keys into the system will erase all previous Touch Keys. Therefore, you must 

always teach ALL the Radio Keys required to operate the security system at the 

same time or, if programming Touch Keys, ALL the touch keys at the same time. 
Programming only Radio Keys however, does not delete the current Touch Keys 

and vice versa. 

 
If an additional Radio Key or Touch Key is required or an existing Radio Key or Touch 

Key is lost the new key can be programmed to the security system using the Ignition 

PIN Procedure (alternatively the optional Keypad can also be used to teach Radio 

Keys & Touch Keys, if supplied with your system. See page 23 & 24). 
 

To programme new Radio Keys and/or Touch Keys: 

 

•

 

Ensure all the Radio Keys and/or Touch Keys required to work the system are 

at hand and that the security system is disarmed (using an existing Radio Key, 

Touch Key, Keypad or previously described Ignition PIN Procedure). 

•

 

Cycle the ignition 3 times in 7 seconds i.e. off to on, off to on, off to on. The LED 

will now display solid green for 3 seconds, before proceeding to flash red. If the 
first digit of the security system’s PIN is 0, then the ignition must be turned off 

whilst the LED is still green. Otherwise, allow the green LED to extinguish and 

then count the red flashes and turn the ignition off immediately after the 
corresponding flash i.e. If the first digit is 3, turn the ignition off after the 3rd 

red flash. 

•

 

With the first digit selected turn the ignition back on. The LED will display solid 

green again for 3 seconds, before proceeding to flash red. Select the 2nd, 3rd 
and 4th digits in the same manner as the first. 

•

 

When the ignition is turned off to select the 4th digit, the LED will display 2 red 

flashes every 2 seconds to indicate the security system is ready to learn Radio 

Keys and/or Touch Keys in the next 15 seconds. 

•

 

If Radio Keys are to be taught press the 1st Radio Key button briefly. The 

dashboard LED will illuminate red for 1 second and the siren will bleep as 

confirmation that the Radio Key has been learnt. Repeat this for the remaining 

Radio Keys. 

•

 

If Touch Keys are to be taught briefly press the 1st Touch Key to the receptacle 

and remove it. The dashboard LED will illuminate red for 1 second and the 

siren will bleep as confirmation that the Touch Key has been learnt. Repeat 

this for the remaining Touch Keys. 
 

15 seconds after the last Radio Key or Touch Key has been taught the security 

system will automatically exit programming mode. 
 

 

 
 

 

 
 

 

Summary of Contents for S Series

































Reviews:

No comments