background image

18

Maintenance

User Manual

SKOPE Centaur Series

Troubleshooting

Complaint

Possible Cause

Repair

1. Cabinet not 

operating and 
no controller 
display:

• Loss of power supply.

• Check that the cabinet 

power switch is turned on 
(see page 10).

• Check mains power supply.

2. Power 

consumption 
is higher than 
expected:

• Unit operating too hot.

• Clean condenser. Ensure 

the cabinet is installed with 

good ventilation around the 

refrigeration unit.

• Cabinet doors are opened 

excessively.

• Keep door/s open for 

minimum time.

3. Product is too 

warm and 
spoiling:

• Restricted cabinet airflow.

• Ensure product is not 

blocking airflow slots and the 
product is no closer than 
75mm from the cabinet top.

• Temperature setpoint is too 

warm.

• Adjust setpoint (see 

page 13).

• Food preparation covers 

raised for extended periods. 

• The covers must stay closed 

when not in use (see 
page 9).

4. Warm cabinet 

temperatures 
and/or 
compressor 
operating for 
long periods 
(more than 1 
hour):

• Blocked condenser.

• Clean condenser coil (see 

page 16).

• Poor refrigeration unit 

ventilation.

• Ensure the cabinet is 

installed with good 
ventilation around the 
refrigeration unit. 

Summary of Contents for Centaur BC070-CB




















Reviews: