SCM Superset 23, Manual

Page: 60 / 145

HEADS
4.18
SUPERSET 23/23E/PLUS
ad-i4_3 P18
scm
Fitting tools of different diameter:
– remove the tool (see para. 4.1)
– loosen the handle (D fig. 4.12)
– turn the screw (F) until the minimum diameter of the new tool (determined with PRESET, see para. 10.6)
appears on the display (E). The drive wheels align with the cutting edge of the new tool.
– fasten the handle (D) and fit the new tool
– make vertical adjustment of spindle
4.2.5 2ND LOWER HORIZONTAL SPINDLE
To reach the spindle, unscrew: knobs A fig. 4.13 , screws A fig. 4.13 , and remove cover S.
It is possible to fit tools with min. dia. 100 mm and max. dia. 200 mm.
Vertical adjustment
Loosen handle (G fig. 4.13)
Turn screw (H) counterclockwise to raise the unit, until the minimum tool diameter (previously determined with
the PRESET) appears on numeric display (I).
NOTE: the exact setting must always be reached “moving upwards”
Subsequently, fasten handle (G).
Transverse adjustment
Loosen screw (H fig. 4.14)
Turn (using the crank provided) screw (D fig. 4.13) clockwise to move the unit towards the Operator.
The numeric display (L) shows the distance between the base of the spindle and the right fence.
Tighten screw (H fig. 4.14)
NOTE: the exact setting must always be reached in direction of the operator, The transverseadjustment must
always be made with the head turning.