SCM Superset 23, Manual

Page: 131 / 145

MAINTENANCE
SUPERSET 23/23E/PLUS
20.19
ad-i20_3.pm5 P19
scm
20-9 REMOV 20-9 REMOV 20-9 REMOV 20-9 REMOV 20-9 REMOVAL AL AL AL AL - STORAGE - DISMANTLING - STORAGE - DISMANTLING - STORAGE - DISMANTLING - STORAGE - DISMANTLING - STORAGE - DISMANTLING
Before moving the machine, disconnect all power and pneumatic lines, following the instructions in
para. 2-1 and 2-2. Refit the red bar.
In case of prolonged machine inactivity, disconnect the power and pneumatic lines, carefully clean
the machine as indicated in “general cleaning” and cover the worktables, slides and tool spindles
with an antirust protection. Do not store the machine in damp environments and protect against
atmospheric agents.
The machine is built of non-toxic materials. In case of dismantling, separate ferrous from plastic
materials and send for scrapping.
20-10 EMERGENCY SITUA 20-10 EMERGENCY SITUA 20-10 EMERGENCY SITUA 20-10 EMERGENCY SITUA 20-10 EMERGENCY SITUATIONS TIONS TIONS TIONS TIONS
In case of flooding flooding
flooding flooding
flooding of the premises in which the machine is operating, immediately interrupt the
power supply. Before restarting work, have the machine checked by a specialized technician.
In case of fire fire fire fire fire , immediately interrupt the power supply to the machine and put out the fire using
suitable extinguishing substances directed on the bottom of the flames. Even if the machine has
apparently not been damaged, before restarting, have it checked by a specialized technician.
As has already been said at chapter 1-10, a free area should be left around the machine to permit
escape in the event of danger.
This machine cannot be employed in explosive environments.