16.12 FIRMWARE UPDATE
If there are problems
during the firmware update, it is recommended to perform the following procedure:
a.
Before upgrading the firmware, verify if the latest version of
NXperience
has been installed.
b.
If a failure occurs during firmware update, the following message will be displayed:
Fig. 50
– Firmware failure
c.
Click
OK
and verify if the device is still available for the u
pdate. If it is, click on
Program
again:
Fig. 51
– Firmware update
d.
If
NXperience
h
as been closed and/or it is no longer possible to find the device on the update screen, as shown in
Fig. 52
, it is nec
essary to
close the
NXperience
, turn off the
LogBox 3G
and reconnect the device to the USB interface for a new attempt.
Fig. 52
– Firmware failure
e.
If the
NXperience
shows an error while reading the configuration, as shown in
Fig. 53
, and the device display is off, try the procedure
described in the following step.
Fig. 53
– Error reading configuration
60/66
