17.2
CERTIFICATES
FCC
Contains FCC ID: N7NHL8549G
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These l
imits are
designed to provide reasonable protection against harmful interference when the device is operated in a commercial environment. This device
generates, uses and can radiate radio frequency energy a
nd, if not installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications.
Any changes or modif
ications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
RF Exposure:
To satisfy FCC RF exposure requirements,
a separation distance of 20 cm or more should be maintained between the antenna of
this device and perso
ns during operation. To ensure compliance, operations at closer distances than this are not recommended. This device and its
antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Opera
tion is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interferenc
e received, including interference that may cause undesired operation.
CE Mark
This is a Class A device. In a domestic environment, this device may cause radio interference, in which case the user may be required to take
adequate measures.
IC
Contains IC: 2417C-HL8549G
This device complies with Industry Canada
's license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the
device.
The installation of the transmitter must ensure that the anten
na has a separation distance of at least 20 cm from all persons or compliance must be
demonstrated according to the ISED SAR procedure.
Under Industry Cana
da regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for
the transmitter by Ind
ustry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotrop
ically radiated power (EIRP) is not more than that necessary for successful communication.
ANATEL
This device is homologated by ANATEL, according to the r
egulated procedures for conformity assessment of telecommunications products, and
meets the technical requirements applied.
This equipment is not subject to the protection from harmful i
nterference and may not cause interference with duly authorized systems.
For more information, see the ANATEL website
www.anatel.gov.br
.
NORM CISPR 22
In a domestic environment, this product may cause interf
erence, which may require that the user take appropriate measures to minimize the
in
terference.
VIBRATION TEST
The device is in accordance with vibration tests in sinusoidal vibration methods - item 6.1 and mechanical shock - item 6.2 of norm NP E
M 12830
(2008).
65/66
