SCIFIT Scientific Solutions For Fitness SCIFIT Scientific Solutions For Fitness SCIFIT
Assembly 3.6
Hardware Required:
STEP 1: UPRIGHT WELDMENT INSTALLATION CONT’D
1f.
Repeat steps 1c, 1d and 1e for the left upright.
NOTE: The
screws will be secured properly in a later step.
(
Qty. 2) M8 Split Washers
1c.
Slide in order (Qty. 1) M8 Split washer, then (Qty. 1) M8 Flat
washer onto the first M8 screw, then
LOOSELY
tighten the
screw into the upper mounting hole located on the outside
of the right upright with a M6 T-handle hex wrench.
NOTE:
The screw will be secured properly in a later step.
(
Qty. 2) M8 Flat Washers
(
Qty. 2) M8 x 1.25 x 16mm Socket Button HD Screws
1d.
Slide in order (Qty.1) M8 Split washer, then (Qty. 1) M8 Flat
washer onto the second M8 screw, then
LOOSELY
tighten the
screw into the lower mounting hole located on the outside of
the right upright with a M6 T-handle hex wrench as.
NOTE:
The screw will be secured properly in a later step.
M8 Flat Washer
M8 Split Washer
M8 x 16mm Socket
HD Screw
Hardware Required:
(
Qty. 1) M8 Split Washer
(
Qty. 1) M8 Flat Washer
(
Qty. 1) M8 x 1.25 x 16mm Socket Button HD Screw
M6 T-Handle Hex Wrench
Tool Required:
1e.
Slide in order (Qty.1) M8 Split washer, then (Qty. 1) M8 Flat
washer onto the M8 screw, then
LOOSELY
tighten the screw
into the mounting hole located on the inside of the right
upright with a M6 T-handle hex wrench as shown.
NOTE: The
screw will be secured properly in a later step.
M8 Flat Washer x 2
M8 Split Washer x 2
M8 x 16mm
Socket HD Screw x 2
