Assembly 3.12
SCIFIT Scientific Solutions For Fitness SCIFIT Scientific Solutions For Fitness SCIFIT
STEP 8: POWER-UP
Part Required:
(
Qty. 1) AC Power Cord
8a.
Verify the On/Off switch is in the “OFF” position, then
plug in the right angle end of the AC power cord into the AC
power inlet located at the front of the machine.
8b.
Plug the other end of the AC power cord into the wall
outlet, then flip the On/Off switch to the “ON” position and
the console turn on .
STEP 9: BELT ALIGNMENT AND TENSION
Tool Required:
M6 T-Handle Wrench
Clockwise
Tightens Belt
Clockwise
NOTE: If belt had been replaced begin at step 9a.
If you are just making making minor adjustments
begin at step 9c.
9a.
Center the walkbelt manually between the side covers.
9b.
Insert an M6 T-Handle wrench into the right end cap
and turn the handle clockwise, then place the T-handle
into the left end cap and equally turn the handle clockwise.
Continue doing this until the walk belt becomes taunt